Pembroke Park is a small town with seventeen mobile home parks inside its borders, four of them set up for RV camping. Dale Village on SW 27th Court is one of the all-ages communities. A manufactured home has its own mold pattern: a shallow crawl space under the floor, a belly wrap that traps water when the plumbing leaks, and thin wall cavities that wet through fast.
The town sits on the Miami-Dade line at low elevation, and it takes the same summer humidity and storm rain as the rest of south Broward. A window unit or a small split system in a mobile home runs hard all summer and drips condensate right where the floor is weakest. When the floor goes soft near a bathroom, the moisture has usually been there a while.
Homeowners in Pembroke Park, whether the home is on a slab or on piers, reach an independent local mold provider when they call us. The provider reads the walls and does the work.
A small bathroom with a soft floor around the toilet is the usual reason for bathroom mold removal, and the provider looks under the floor as well as at the wall. Wet wall panels and insulation after a plumbing leak call for mold removal that reaches into the cavity. Homes cooled by a central system with ducts under the floor or in a small attic ask for HVAC mold cleaning when the smell rides the air.
The Town of Pembroke Park Building Department at 3150 SW 52nd Avenue keeps its own checklist for manufactured home work, and permit records on a lot go back to 1988 in the town's online system. Repairs that touch plumbing, electrical, or the structure of a manufactured home go through that office.
Water in Pembroke Park is billed by Broward County Water and Wastewater Services, not the town, so a suspected leak on the meter side starts with the county at 954-831-3250. In a mobile home park, the line from the meter to the home may be the park's responsibility or yours; the lot lease says which.
Call (954) 519-7189 and tell us where the mold is. A local provider serving Pembroke Park takes it from there.
Containment, negative air, HEPA filtration, and removal of affected drywall, trim, and insulation, then cleaning and drying.
Heavier dark growth handled with full containment and protective gear. Color does not identify the species, and the process does not change.
Full containment, negative air, and room-by-room removal after a flood, a long roof leak, or a house that sat closed through a wet summer.
Air handler, coil, and duct cleaning when the smell shows up every time the air conditioning runs.
Roof-deck and truss mold from roof leaks, blocked soffits, or ducts sweating in a hot attic.
Mold in drywall, ceilings, grout, and behind vanities from steam and slow leaks, the most common first call.
Finding and removing the source of a musty smell that survived cleaning, then treating the air and surfaces so it does not come back.
Drywall, baseboard, insulation, and cabinet bottoms put back after removal, with the moisture source fixed before anything is closed up.